What is ""Initiate ROMPaq disaster recovery procedures" ?

[dhchoi]

After SPS firmware update process failed, the system won't boot and power LED button light just blinking.

So I tried....

1) S6 DIP switch to ON : won't boot
2) S1, S5 and S6 DIP switch to ON : won't boot
3) Try to reinstall SPS using by iLO : impossible (because maybe it needs system boot.)

Regarding the HPE Tech. document,  "Initiate ROMPaq disaster recovery procedures" can be solve this kind of issue.

Please let mt know what is this procedures.

[shiva_jr]

Hi @dhchoi ,
    I am not sure where the ROMPaq Disaster recovery procedure works.
     But here is the document1  and document2 which are having the required procedure.
Regards,
Shiva_JR

[TVVJ]

Hello,

Please provide the model number of the server so that a ROMPaq may provided for the relevant model.

Regards,

[dhchoi]

@TVVJ Model name is "Proliant Microserver Gen10 Plus".

Please let me know how to use it.... Many Thanks!

[TVVJ]

Hello,

You may use the "System ROM Flash Binary - HPE ProLiant MicroServer Gen10 Plus (U48) Servers" to perform the procedure.

Regards,