Will 670728-002 10Pin to 2x6Pin GPU Y-Power Cable 755742-001 work on 12 -3.5 LFF backplane

[WalterV]

I have 2- 747560-001 power cables, but they won't work. What I need is a 10 Pin to 2-6 Pin Y- power cable like this. Will this cable work to power the 12-hard drive LFF backplane?HP 670728-002 ProLiant Gen9 10Pin to 2x6Pin GPU Y-Power Cable 755742-001

The 10 pin connector end would connect to the 10-hole Drive Backplane power connector in front of the power supplies shown in the enclosed picture. My server has an 8-2.5 SFF backplane in the front of the server. All my large hard drives are 3.5 LFF, so I am adding a LFF backplane w/ a homemade hard drive cage externally. I understand that I will need to customize the length of the cable once I get the correct connector to go into the motherboard.

Thanks

Also, does anyone know the gauge of the wires in the power cables? If not, I will be able to figure it out once I have cut the wires.

Thanks

10 Pin Drive Backplane power connector

[TVVJ]

Hello,

You may refer to section "Cabling" on page 155 of the HPE ProLiant DL380 Gen9 Server User Guide for more information on internal cabling.

Regards,

[WalterV]

Thanks,

Though these diagrams don't help me because I am adding a 12-LFF drive backplane inside a homemade external cage to my SFF server. It will be a DIY setup.

I ordered the 10pin to 2-6pin y cable, so I will find out if it works when I get the cable.

[SydUmar_1]

Hello WalterV,
Could you please confirm the part number of the 10pin to 2-6pin y cable that are awaiting ?
I am guessing, this is what you've ordered - https://partsurfer.hpe.com/ShowPhoto.aspx?partnumber=784622-001

[WalterV]

@SydUmar_1 No, that is not the cable that I purchased. Also, the y- cable that I ordered didn't work.

I also have 2- hp 747560-001 backplane power cables that will work with some customization.

That is what I am going to try when I have time.

Thanks for your time.