booting PXE OVER IPv4

[raju777]

Server cannot bootup

shows this error : 

>>booting embedded LOM 1 port 1 HPE ethernet 1gb 4-port 331i adapter - NIC (PXE ipv4)

>> booting PXE OVER IPv4

[Suman_1978]

Hi,

Its saying what the NIC model is and its trying to boot over PXE.
This happens if you have configured your server to boot from PXE rather than the hard drives within the server.

Configure the server to boot from hdd, cofiguration depends on your server model and the RAID card installed.

Thank You!
I work with HPE but opinions expressed here are mine.
HPE Tech Tips videos on How To and Troubleshooting topics

[raju777]

@Suman_1978 

Can you give a video on how to fix it? 

[Suman_1978]

Hi,

I dont think there is any video on this configuration, but here are some documents and video links which may help depending on your server model.

Gen9 Changing the UEFI boot order.
Gen10 Changing the UEFI boot order.

https://support.hpe.com/hpesc/public/videoDisplay?videoId=vtc00020120en_us
https://support.hpe.com/hpesc/public/videoDisplay?videoId=vtc00020076en_us

Thank You!
I work with HPE but opinions expressed here are mine.
HPE Tech Tips videos on How To and Troubleshooting topics