ProLiant Servers - Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

Cannot Procede to install OS in Smart Start after array config

 
Highlighted
New Member

Cannot Procede to install OS in Smart Start after array config

I am trying to use the Smart Start utility to configure the arrays and load the OS on a new DL320s server. I have configured the arrays but when I proceed to "Deploy" the OS, and click continue, nothing happens. Boot controllr disk size is showinf -1 mb in the Server Deployment Hardware Configuraton after configuring the arrays. Is there a wait time after array and logical drive configuration or have I missed a step?
2 REPLIES 2
Highlighted
Trusted Contributor

Re: Cannot Procede to install OS in Smart Start after array config

Timothy

Did you tried to configure the array by pressing ctrl+S while booting

Please check may be some times Array controller error
Highlighted
New Member

Re: Cannot Procede to install OS in Smart Start after array config

I just went to plan B, load the OS, which I did not want to do. Now I have to load the drivers from Windows. All went well withthat except for the network adapter configuration whaic I am working on now.