Configuring HP IP-KVM switch with LDAP

[Aaron.S]

I hope this is the right place to post this message, the situation is a little pressed for time, and there was one other similar thread I was able to find, so here it goes.

I've read the user guide word for word, and it is not producing any viable results.


I'm currently trying to configure an HP IP KVM switch (2x1x16) for our lab environment using LDAP authentication.

We have three DCs for our AD environment. Domain is ' head.active '.

In the tree structure under the DC, the users are found under ' Management Services ' > ' User Services '.

The user I'm trying to configure the LDAP with is:
First name; Test
Last name; User

I understand that after 'Search DN : ' I would type: ' cn=Test User,ou=User Services,ou=Management Services,dc=head,dc=active '

Am I missing something crucial here?
Does the IP KVM not work with users located anywhere but cn=Users ?

I hope I've done a good enough job explaining. If I need to add anything, please tell me so, really do need to get this up and running.

Thank you for your time and considerations.


-Aaron