CSB-6 ULTRA ATA-100, ERROR when HDD used more than 132 GB

[Saleel A.P]

Hi,
In HP Website its listed my exact problem and have fix for it which is as follows, but problem turns to disk not available.

http://www4.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&admit=-938907319+1135083085866+28353475&docId=200000081072901

ROM update ver 2005.08.01 and
HP ProLiant CSB-6 ATA-100 IDE RAID Driver for Windows 2000/Server 2003
version 4.2.0805.2005

The question is when I insall the mentioned ROM VER and restart then installed CSB-6 ATA-100 IDE RAID DRIVER which is IDE raid driver and reboot the system, I am unable to see the drive, in our case 600GB drive (RAID 0)2x300GB.
I have follwed the instruction but in windows disk management i can see the HDD with red cross and when i right click and say re-activate nothing happens.
when i roll back to driver version 4.1.730.2003 then i can see the drive, but when i try to read write, i get lot of disk error in the event viewer, event ID 11: and server hangs. "THE DRIVER DETECTED CONTROLLER ERROR ON DEVICE\HARDDISK0"

Appreciate your advice how to fix
Regards..

[Scott Savage]

I have a similar problem at the moment. I have updated the BIOS and the driver using the package found here: http://h18007.www1.hp.com/support/files/server/us/download/23545.html?jumpid=reg_R1002_USEN

The problem is that the download at that address has the wrong .inf file included (it is an earlier version). Can someone please update that file? I am getting "disk" errors appearing in the server system event log regarding a hard disk delayed write due to the array. I think this is related to the incorrect driver as the array is 250gb.

Thanks a lot for your help.

[Scott Savage]

I am still having this exact problem. I have been told by HP support that a new driver is coming, however this is not acceptable because my server is currently inactive. Can someone please help? Thanks!