Does HPE GEN10 PLUS support Thunderbolt 3 PCIe card？

[pp0pp]

Dear all, I want to connect my Thinkpad and HPE GEN10 PLUS with the thunderbolt 3 cable to grab a 20Gbps LAN speed. But I am not sure if HPE GEN10 PLUS supports a Thunderbolt 3 PCIe card?

As you know, latops usually get 1Gbps network on board. Thunderbolt 3 can get 20/40Gbps high speed connection. If I connect latops and HPE GEN10 PLUS with the thunderbolt 3 cable, I can grab a higher network speed much more than 1Gbps.

So far, I know that DELL has the lowprofile Thunderbolt 3 PCIe card.

[SanjeevGoyal]

Hello,

Please follow the below HPE ProLiant DL380 Gen10 Plus Server quick space.

https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=a50002553enw#

[nmcain]

Depends on the form factor of the card and software drivers, but the actual speed of the PCIe slot on the GEN10 plus should support it, IIRC it's PCIe3 x16.

[KevinSpringPM]

No sorry, this is not supported.

[pp0pp]

Hi KevinSpringPM, thank you for your response.

In fact, I was asking about HPE ProLiant MicroServer Gen10 Plus. Not HPE ProLiant DL380 Gen10 Plus Server.

[KevinSpringPM]

Understood, unfortunately there are no servers in the HPE portfolio that support TB3 expansion so my answer is the same.