EISA Configuration Utility!!

[cdrom_1]

Hi there,

i hve an problem with the EISA Configuration Utility.
When i boot with the EISA Configuration Utility Disk, i get the following errors.
I am using an HP Netserver LXr PRO:
---------------------------
EISA Configuration Utility
Version: H.01.00
---------------------------
Error 1:
Failure Conditoin during the loading of the Overlay (OVL) file associated
with the board beeing added to the system.

CFG file: !HWP2220.CFG
OVL file: HWP2220.OVL

Error 2:
Cannot continue the config without a system board CFG file!

--------------------------

What's wrong?

[meloni · Accepted solution]

hi
probably you didn't have on your ecu flpoppy all the files .cfg for the components in your servers, so try to find the required files on your navigator cdrom and copy them on your floppy
bye

marino

[meloni]

here is where to found the files

http://isupport2.hp.com/Solution.asp?id=83e0044d-3fd7-11d5-beaf-0090278a7756

bye

marino

[cdrom_1]

thx for that!

The problem was that the floppy disk i used was corrupt! I created a new one with the HP program and everything was fine.