HP Netserver E800 beep code errors

[Justin_81]

Hi,

I currently own a netserver E800 server running Windows 2000. When I try to boot up, I get a series of beeps and the system wont boot. I get a blank screen and I cant get in the BIOS. The series of beeps is 1-2-2-3. I've looked around and I havent found anything concrete. Has anyone seen this before? How can I get my server up and runnign again? Any help would be greatly appreciated.

Thanks

[Robert-Jan Goossens]

Justin,

1-2-2-3 BIOS ROM checksum
Attempt update of ROM BIOS, then replace system board

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=20916&locale=en_US&taskId=135&prodSeriesId=45939&prodTypeId=15351&swEnvOID=54

Hope this helps,

Robert-Jan

[Mark Young_2]

Hi,

I don't have much to add to that, only that I would recommend clearing the CMOS before you try flashing your BIOS. Also make sure you are using the latest BIOS version from HP.COM.

Just in case you need it, this document lays out the Clear CMOS procedure on your server:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?locale=en_US&taskId=110&prodSeriesId=45939&prodTypeId=15351&objectID=tis02234

[Justin_81]

Thanks guys for your replies. I called the support department and found out my warranty is good for another week! All this to say that they will be changing my motherboard.

[Dusan_5]

I Allso Curently Own A netserver E800 But I get an error 1-1-1-1, NOo video, No Boot, I Allredy Cleared Password, And system settings no help. Server beeps 4 times and then doo nothing.