LH11 processor upgrade??

[allan_16]

Hi was wondering if anyone out there can help? i got a lh11 with a p11 233mhz and have been told the motherboard can handle a p11 400mhz, i installed the processor and changed the swithches or jumpers now i get an error of missing bios data block??? and ye i installed the most recent bios. any suggestions??

[CA660377]

333MHz is the highest processor for the LHII.

[allan_16]

I set the dip switches to run at 333mhz but still get the same problem? even with a p11 400mhz in it it refuses to run any higher than 266mhz and i still get the same message...missing bios data block for cpu?

[CA660377]

Well, just cause the dip switches are configured at 333, doesn't mean it takes on all the characteristics of a 333. The processor has newer code in it than the 333. That's why this error will not go away.

[allan_16]

Well is there any chance on giving me any tips on how i can upgrade the processor then?

[CA660377]

My only advice is to buy a new server. There are limits in technology that can not be broken. This is one of many.