ProLiant Servers - Netservers
1754417 Members
2939 Online
108813 Solutions
New Discussion

Microserver GEN8 long power on

 
TheBay
Occasional Visitor

Microserver GEN8 long power on

Bios is set to always power on when mains is back.

On mine, power led turns orange and stay idle there for 20-30 seconds before server start automatically (green led).

Is it the rigth behavior ?

Can waiting time be reduced ?

1 REPLY 1
SydUmar_1
HPE Pro

Re: Microserver GEN8 long power on

Hello TheBay,

Please access the BIOS by restarting the Server and tapping F9 while on POST to access the BIOS / RBSU / Setup Menu. Select the Option called Server Availability, and then select Power-On Delay. You should get the below options :

No Delay
15 Second Delay
30 Second Delay
45 Second Delay
60 Second Delay
Random Delay

Select the required option and hit Enter

Hit ESC to go back to previous menu
Hit ESC to Exit the BIOS / RBSU / Setup Menu
Hit F10 to Exit the Setup Utility
This will restart the server.

 

I'm an HPE employee.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo