NetServer 5/166 LS4

[Tab Teano]

Purchased A used 5/166 LS4, Previous owner jumped the NVRAM jumper and cleared it, get a 905 error @ post, but can continue to boot after hitting escape key. Need to know how to correct this error. Have downloaded and updated Bios and ecu configurations, but still get the error.
Also need configuration CD. All that was supplied was a diag disk (Passes all test.
Any help would be greatly apperciated.

[BR642007]

error 905 during POST means that the NVram is cleared by a jumper.
Is the jumper back in it's original position?

Otherwise boot from the ECU diskette and select option 3: View or edit details
Then press F10 to to finish the setup and finally select step 5 ( save and exit) and Enter to reboot the server.

This should clear the error.

Marco

[Tab Teano]

Thanks, ill check it out when I get home from work. I will let you know what happened.