HPE Community
ProLiant Servers - Netservers
1823069 Members
3220 Online
109645 Solutions
New Discussion юеВ

Netserver E60 Memory

 
CA1226981
New Member

тАО12-20-2004 05:19 AM

тАО12-20-2004 05:19 AM

Netserver E60 Memory

I have an E60 450 PII with 128M Dimm. Specs say this should be a 100mhz, but the installed memory is 133mhz and a 100mhz expansion would not work. Will the standard serer 133mhz work with this machine?
0 Kudos
Reply
2 REPLIES 2
CA1036363
Frequent Advisor

тАО01-06-2005 01:33 PM

тАО01-06-2005 01:33 PM

Re: Netserver E60 Memory

Ron,

The memory modules you use must be the same in order to use. I suspect that both will work separately but not together.

I recommend using either HP or Kingston (KTH7155/256) memory.

Hope this helps.
0 Kudos
Reply
CA1226981
New Member

тАО01-06-2005 02:34 PM

тАО01-06-2005 02:34 PM

Re: Netserver E60 Memory

I tried the 100mhz separately and it would not work. I would like confirmation that the 133mhz will work in this machine.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.