cancel
Showing results for 
Search instead for 
Did you mean: 

Netserver E60

 
SOLVED
Go to solution
Highlighted
Occasional Advisor

Netserver E60

Hello,

I have a netserver E60 and it doesn't want to reinstall software and i can't find my Windows NT 4.0 cd and server 2003 doesn't work

What to do?

It has a Netraid from HP don't know which type
And 3 Compaq harddisks


Help
Thank you!

Thomas
3 REPLIES 3
Highlighted
Frequent Advisor
Solution

Re: Netserver E60

Thomas - I have an E60 as well and I am running Windows Server 2003.

If you are trying to do a clean install you must first update the BIOS to support Windows Server 2003. You might have to update the NetRAID BIOS as well. Check HP's website. Also, download all the available drivers, especially the NetRAID driver. You will need to put this driver on a floppy for installation. After you upgrade the BIOS, you should be able to boot from CD. When it starts be sure to hit the F6 when prompted. Then add the NetRAID driver so it recognized the NetRAID controller and your disk drives. This is assuming that you have already built your arrays using the NetRAID configuration utility.

Hope this helps.
Highlighted
Occasional Advisor

Re: Netserver E60

hello,

It says: Operating system not found..



Everytime when i start windows installer it says

Starting win server 2003 setup and then it does nothing..


It is driving me crazy



Thomas



PS: Can you give links for the sofware to download?

Thnak you
Highlighted
Frequent Advisor

Re: Netserver E60

Thomas,

It could be that you need to make the BIOS Boot from CD. Go into the setup mode and make sure the BIOS is set to boot from CD first. Another possibilities is that your OS CD is bad.

Here is the link:
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=18330&locale=en_US&taskId=135&prodSeriesId=45937&prodTypeId=15351

If you need the BIOS updated select the link that says "Cross operating system (BIOS, Firmware, Diagnostics, etc.)"

Hope this helps.

DR