NetServer LC, EISA configuration NVRam Bad

[valdivia antonio]

Hi,
I have an hp netserver LC but it not boot, i have this message "EISA configuration NVRam Bad", I run the Ecu disk, this does'nt work, just one "bleu screen", It try too to run the CF.EXE, but this ask me for "NetServer #1 diskette"

I get your CFG files (November 14, 2002 18:46 PM GMT ), but i can't read it, winzip says "file no valid"

Thanks much in advance,

Antonio

[paul matejcek]

is this an intel 486/66 proccessor or an intel pentium chip?

your blue screen can be a result of a stick of ram memory going bad or if you replaced memory it may not be placed in the slot just right or not the correct kind of memory.

this macine needs the memory placed in pairs starting from slot 0

the diskette #1 it is asking for is the bios disk you can make from this link, run that first then put in the diskette # 2 you will make from this site follow the instructions and save and exit

http://h20004.www2.hp.com/soar_rnotes/bsdmatrix/matrix50439en_US.html#BIOS