NetServer LH Plus BIOS Beep Codes

[Ed_95]

I have recently received this server and have no knowledge of it. On POST, I get the following beep code.

1-3-4-1

I also get a blinking DIMM light associated with the memory bank. I've swapped out different DIMMs (128MB and 64MB) and tried in different banks. I've used PC100 and PC133 memory because I don't have anything slower (could this be it?).

I've reseated cards, connectors and CPU Board.

Any help will be greatly appreciated.

[CA838674]

Probably in LH Plus you cannot mix different sizes.Try with only 128 modules(Hp or Kingston LH PLus Compatible)

[Peter Murphy_2]

Hi Ed

I have an LH II and in these old servers you can't run SDRAM you can only run 168 pin EDO
I may be wrong with the LH Pro, but if you have 1 slice of genuine HP in the machine as Guido said try it with one only. Nice if it is the 128, but get it going first. I just bought 2 X 128Mb on eBay for A $35.00 each brand new in box from Queensland Australia. He does have more!

Peter