Qlogic driver problem

[Kyle Jenner]

Hello,

Im having some issues with one of my clusters, the hardware setup for the said cluster is 3 x BL460c G1 servers with QLogic QMH2462 fibre cards. I believe it could be an issue with the driver, the release notes of the driver, see below, states I should be running driver 9.1.3.17 but all blades are installed with 9.1.3.18 which is the latest of HP.

Does anyone know where I can find the Qlogic 9.1.3.17 driver for the QMH2462 fibre card? Also has anyone seen any issues with the above driver?

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=uk&prodTypeId=3709945&prodSeriesId=1844104&swItem=co-56462-1&prodNameId=1844105&swEnvOID=1005&swLang=8&taskId=135&mode=4&idx=0

Thanks
Kyle

[Astro2]

Hi

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1844105&prodTypeId=3709945&prodSeriesId=1844104&swLang=8&taskId=135&swEnvOID=1005

9.1.3.16 or 9.1.3.18 ... it's seems that the 9.1.3.17 not exists / has been removed.

Maybe you can find the .17 in a old PSP.

Max