HPE Community
ProLiant Servers - Netservers
1827047 Members
4815 Online
109713 Solutions
New Discussion

Temperature sensor problem HP ProLiant Microserver Gen10

 
Jacopo99
Occasional Contributor

‎06-08-2020 02:59 AM

‎06-08-2020 02:59 AM

Temperature sensor problem HP ProLiant Microserver Gen10

Good morning,
I verified the following problem: "The computer shuts down properly. When I turn it on, the following message appears. Then it shuts down and starts working again."
I also attach the temperature specifications calculated with Speccy.

What could it be? I've already run all the updates. I assume it's a hardware problem. What do you think it could be?

Thank you for your help.

I'll stand by thank you

Jacopo

IMG_0100.JPGIMG_0101.JPGIMG_0102.JPG

0 Kudos
Reply
2 REPLIES 2
Sebasbin
HPE Pro

‎06-09-2020 03:06 AM

‎06-09-2020 03:06 AM

Re: Temperature sensor problem HP ProLiant Microserver Gen10

Hi Jacopo99,

This issue is related to the below advisory and please perform the steps as per advisory to resolve the issue .

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-a00036218en_us



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
0 Kudos
Reply
Med-Hamdi
HPE Pro

‎06-16-2020 07:33 AM

‎06-16-2020 07:33 AM

Re: Temperature sensor problem HP ProLiant Microserver Gen10

Hello,

Plase refer to the below advisory

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-a00036218en_us

Thanks

I am a HPE Employee

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.