extended access control list on ProCurve 6600 K.15.02

[BradV]

Good Morning,

I'm trying to create a first IPv4 extended access-list. I have a fairly simple set up. Two 1Gb ports (23 & 24) are trunked for the downlink from the external corporate network. These ports are in VLAN 734. My internal part of the corporate network is on ports 10-20 in VLAN 998. External to the switch, I have a group of Windows 2008 servers in network segment 7.217.96.32/27. I want to allow them access to four hosts, 7.217.93.18[1-4] on tcp port 8080 and deny access to all other addresses. I intend to create an extended access-list as seen in the attachment. So, first does my syntax above look correct? Second, should I apply this to VLAN 734 in or VLAN 998 out? Thanks!

Sorry if this is the wrong forum.