Compatibility Check for HPE Cluster Configuration

[pdsgomes]

Hi,

We have two HPE DL360 Gen10+ servers (P55273-421), each equipped with:

• HPE NS204i-p Gen10+ Boot Controller (P12965-B21) for Windows

• HPE Smart Array E208e-p SR Gen10 Controller (804398-B21)

We would like to connect both servers to a HPE MSA 2060 12Gb SAS SFF Storage (R0Q78B) populated with 20x HPE SSD 960GB (R0Q46A), and configure the environment as a Windows Server Failover Cluster (WSFC).

Could you please confirm if this hardware setup is fully compatible for such a clustered configuration, particularly regarding shared access to the MSA via the E208e-p controllers?

Also, are there any additional components (e.g., licenses, cables, or multipath software) that would be required or recommended?

Thank you in advance.

Best regards,
Pedro Gomes

[shiva_jr]

Hi @pdsgomes ,

Mentioned boot controller and Smart Array controller are supported on HPE DL360 Gen10 plus.  Refer page 9 and 10 of this document.
To connect MSA to Server, you may required Mini-SAS HD cable. Please refer this document. 

Regards,
Shiva_jr

I hope this post helps you. If it does, please consider awarding Kudos and marking it as an Accepted Solution.

[BPSingh]

Greetings!

For hardware compatibility, you may refer to HPE SPOCK and the QuickSpecs.

I see that Casper has already shared this information with you in detail.

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".