HPE Community
Server Management (Insight Manager 7)
1819898 Members
2646 Online
109607 Solutions
New Discussion юеВ

snmp 100% CPU Utilization

 
Ayman Altounji
Valued Contributor

тАО05-10-2001 04:00 PM

тАО05-10-2001 04:00 PM

snmp 100% CPU Utilization

I have loaded insight 5.0 on two DL380's with 2000 Server, no other software except OS, service pack, and insight have been loaded. The snmp service has my processor pegged at %100, I have loaded the SP1, and set the snmp traps.. When I test the snmp trap it says remote alerted has not finished initializing or is disabled... If I missed something I did it exactly the same way on the other server.. Has anyone seen this..
0 Kudos
2 REPLIES 2
Ayman Altounji
Valued Contributor

тАО05-13-2001 04:00 PM

тАО05-13-2001 04:00 PM

Re: snmp 100% CPU Utilization

Sounds like your are using Terminal Services. That is a known issue, although I don't know if it is known why it happens.
0 Kudos
Ayman Altounji
Valued Contributor

тАО02-21-2002 04:00 PM

тАО02-21-2002 04:00 PM

Re: snmp 100% CPU Utilization

I have encountered a similar issue with an ML350, Windows 2000 server, SP2, insight 5.2, T1500XR ups. SNMP is running at 100% as well.
As a side I installed the power management agent and at each reboot 2000 detects new hardware (powerware ups). I find this odd being that communication has been established with the UPS.

Any thoughts.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.