Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

Disable port 443 on rx2800i4 iLO3 Firmware Revision 01.67.04

 
Highlighted
Occasional Contributor

Disable port 443 on rx2800i4 iLO3 Firmware Revision 01.67.04

For security reasons we need to disable the iLO from listening on port 443.  We do not use http(s) to get to the iLO so we do not need the port to be active on the iLO.    Has anyone else had to meet this requirement and know how to resolve it (ie. ACAS plugin 20007).

 

We used the "SA" command in MP to disable web SSL access and rebooted the server but the iLO still allows connections over port 443.

Ex:

CM:hpiLO-> sa

SA

This command allows you to modify MP access configuration.

Current Set Access Configuration:

T - Telnet : Enabled

W - Web SSL : Disabled      <-- Assumed disabling this would stop listening on 443 but it didn't

H - SSH : Enabled

2 REPLIES 2
Highlighted
Acclaimed Contributor

Re: Disable port 443 on rx2800i4 iLO3 Firmware Revision 01.67.04

Did you reboot the ILO too?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
Occasional Contributor

Re: Disable port 443 on rx2800i4 iLO3 Firmware Revision 01.67.04

Hi Torston! Yes, I reset the iLO using XD -reset, and it rebooted.  The change was intact after the reboot, but I was still able to make a connection to port 443 on the iLOM's I.P. address.

Sharla