First instalation iLO Amplifier Pack 1.70 and 1.71 does not work

[Petr81]

Hi,

I'm trying a clean installation of the iLO Amplifier Pack, and my network setup doesn't work at all. DHCP doesn't work or I can't give a static address to it. I am testing the appliance version for vmware 1.70 and version 1.71. 
Any network settings will not be extended to the configuration. When I used CLI there is a error "Network configuration settings changes failed"

Pet

[TVVJ]

Hello,

Please download the appliance afresh and start the process again and see if this helps.

Regards,

[Agg-HQ]

We have the same issue. None of the network settings that we apply are saved/entered after the reboot so we cannot access the web portal. We have tried the latest version (v2.14 - Windows). Is there a solution for this? Or are we missing something?

[Sunitha_Mod]

Hello @Agg-HQ, 

Thank you for posting. Since you have posted in an old topic and there is no response yet, I would recommend you to create a new topic using the create "New Discussion" button, so the experts can check and help you further.