Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

HP G10 DL360 - Redfish API Python Connection Timeout Error

 
Highlighted
Occasional Visitor

HP G10 DL360 - Redfish API Python Connection Timeout Error

Been trying to connect to the ilo redfish API via python and Postman and Ive ran into some errors. 

For some DL360s, through python requests a "Connection Timeout" error is thrown, while through Postman it went through fine. Note that no ssl verification is used on either. 

For other DL360s, python requests would go through just fine. 

Anyone else run into the same error and has figure out why this is the case?

3 REPLIES 3
Highlighted
HPE Pro

Re: HP G10 DL360 - Redfish API Python Connection Timeout Error

Greetings,

Have you checked by reset iLO from ILO web console, if no then reset iLO from iLO web console and check the status.

Rebooting (resetting) the iLO processor with the web interface
Prerequisites :

Configure iLO Settings privilege

Procedure :
1. Click Information in the navigation tree, and then click the Diagnostics tab.
2. Click Reset.
3. When prompted to confirm the request, click OK.
iLO resets and closes your browser connection.

 

I am an HPE Employee

Accept or Kudo
Highlighted
Occasional Visitor

Re: HP G10 DL360 - Redfish API Python Connection Timeout Error

Hi, 

Thanks for your suggestion, but that didnt work. It still getting "Connection Timeout" when using python.

Highlighted
HPE Pro

Re: HP G10 DL360 - Redfish API Python Connection Timeout Error

Greetings,
As you said in some HPE DL360 Servers, python requests worked fine. We would like to know if the servers in your environment have consistent firmware levels or have varying levels of firmware.


If there is variation in firmware level then please check by updating firmware and bring the firmware on same level as on servers on which python requests worked fine.

 

I am an HPE Employee

Accept or Kudo