HPE Lights-Out Standalone Remote Console and SmartCard

[PhS-]

Hello,

is there any way to get 'HPE Lights-Out Standalone Remote Console' to work with SmartCard. 

My user is smartcard only and I would like to be able to use this authentication to access the console. If I successfuly configure Two-Factor for the iLO (which I did not manage yet), will it also work for HPE Lights-Out Standalone Remote Console ? (iLO 4)

[PhS-]

I successfully configured the iLO for a zero sign in. (These are iLO 4.)

My user account is smart card only (windows) ... but 'HPE Lights-Out Standalone Remote Console' does not seems to acccept this

[ksram]

Hi @PhS- 

Thank you for the Post and sorry for the delayed response

Please follow the below :

1. Setup an Smartcard enrollment Agent in your directory to assign certificates to the Smartcards.
2. Verify your directory settings can logon to iLO with two-factor disabled.
3. Verify Two-factor settings can logon to iLO with Directory disabled.
4. Enable both two-factor, and directory. The first logon phase will be logon with the smartcard certificate, then you will see a prompt for the directory password for the Directory User of the SmartCard. Depends on how the Certificates are build, you may need to change the "Certificate Owner Field" in the Two Factor Authentication page to "SAN" or "Subject" to get the direcotry logon to work.

Thank you

RamKS