iLO 5 Automatic Certificate Renewal

[javbux]

Last year I configured SSL certificates for iLO on my servers to use Windows NDES / SCEP with the view that that should take care of renewals.

ProLiant DL360 Gen10

iLO 5 v2.72

iLO Advanced Licence

My certificates are due to expire next week and I cannot find any information on how they should be automatically updating or even troubleshoot.

I managed to find an article that said when there is 30 days left they should auto-renew and I should check

Information / Security Log

But there is no information / errors in here in relation to automatic certificate renewal.

Can anyone shed any light on how the automatic renewal should be working or how to troubleshoot it?

[support_s]

System recommended content:

1. HPE iLO 5 2.97 User Guide | Renewing automatically managed SSL certificate

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[javbux]

Yes, that was the section that explains what should happen.

What do I do if that has not happened please?

There is nothing further in the user guide whatsoever.

[Bunsol]

ILO advanced license once set on a server does not need any renewal. It is needed only when a systemboard is replaced and the license needs to be re-activated. 

Please refer to ILO user guide and refer to these topics:-
https://support.hpe.com/hpesc/public/docDisplay?docId=a00105236en_us&docLocale=en_US&page=GUID-B8DCFA9C-88F9-4BE5-A25E-8D02F9AE1598.html
Enabling Automatic certificate enrollment
Updating certificate enrollment settings
NOTE: Updating the settings does not initiate certificate enrollment. To start the enrollment, first disable the service and enable it again.

Hope this helps. If issue persists then further troubleshooting might be required and would recommend you to open a support case/ticket.

[javbux]

@Bunsol Hello Bunsel

Thanks for your reply.

I dont have an issue with iLo Advanced licencing, the subject line does say iLO 5 Automatic Certificate Renewal.

I configured this all last year using the guides available.

This year they are due to expire and I cannot see that they are going to renew.

This is what I was seeking advice on.

[Bunsol]

If disable and enable is not working then please raise a support ticket.