HP Proliabt DL360 Gen10 udev error

[DCCTECHGSC2023]

Hi, this is our first time handling a server installation and we were greeted by the intelligent provisioning wizard wherein we were able to create an array. After that, it was time to install the OS (Windows Server 2022), we figured it might work with the rapid install software and it kept saying that there is no media detected even if the DVD is installed in the DVD-ROM. We found a few posts in the forums here that all we needed was a firmware update. We did that and let the server run the update. After coming back a few mintues later, there were no errors whatsoever and we attempted to enter the Intelligent Provisioning again. 

After that we were greeted by a screen with only SELF UPDATE as the option and there were command line errors.

[support_s]

System recommended content:

1. HPE ProLiant DL360 Gen10 - Unexpected Restart

2. HPE ProLiant DL360 Gen10 Server - Not able the access Intelligent Provisioning after pressing F10 key

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Rama2]

To resolve the issue, please follow these steps:

Download the latest version of Intelligent Provisioning from the following link:

Intelligent Provisioning Recovery Media for Gen10 and Gen10 Plus :- https://support.hpe.com/connect/s/softwaredetails?language=en_US&softwareId=MTX_92a67eb35f1f429bb007a6dbc8&tab=revisionHistory

Flash your system with this updated version of Intelligent Provisioning.

After the update is complete, check the status of the system to ensure that the issue has been resolved.