ILO II v1.42 running on DL585G - CD Boot Fails

[Kimik]

Hello,

I am trying to boot a 585G2 with virtual CD. The boot always fails with isolinux: Disk Error 80, AX=4200, drive 9F. The same ISO works on an identical other 585G2, and also 380G4's without this error.

Other iso's also fail - eg. smartstart. I am wondering how this could be the case, when these ISO's work on other servers. Something is wrong with my ILO!

Has anybody else seen this?

regards,

[KarloChacon · Accepted solution]

hi

just to clarify that error is when server is trying to load I mean you see the server mount CD and that error is displayed in the remote console

isolinux: Disk Error 80, AX=4200, drive 9F

just in case update to 1.43 ilo firmware

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3219717&prodNameId=3288124&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-9f76e0c15d0a4d28825b80df03

regards

[Kimik]

Thanks for the tip. I upgraded it and no change. What is hell strange is booting the sam e ISO image from the physical CDROM drive also fails, so I am beginning to think hardware problem somewhere in the bus...

[KarloChacon]

well yes

if physically in the server also fails and several iso fails

I think also might be a HW issue

Regards