HPE Community
Server Management - Remote Server Management
1823010 Members
3854 Online
109645 Solutions
New Discussion

iLO Network Settings

 
Mike Murawski
New Member

‎07-26-2007 01:59 AM

‎07-26-2007 01:59 AM

iLO Network Settings

We have a network here with a few different address ranges:

192.168.248.XXX
192.168.254.XXX
192.168.255.XXX

I am trying to configure all of our HP blades to be be on a separate range (ex. 192.168.170.XXX) However I can not get a connection when trying to do this.

I can connect to the iLO when the settings are:
IP: 192.168.255.180
SUB: 255.255.255.0
GATE: 192.168.255.254

I have tried a few different setting for the iLO when trying to make it another address range with no luck. Any help is appreciated.

Thanks
0 Kudos
Reply
1 REPLY 1
barnett chan
Trusted Contributor

‎07-30-2007 04:53 AM

‎07-30-2007 04:53 AM

Re: iLO Network Settings

Try a subnet of 255.255.252.0 or just 255.255.0.0.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.