IP Console G2 - Cascading via Top of Rack Switch, possible?

[Motlive]

Hello All!

We have some HP IP Consoles, 0x models and 4x models. As I understand it we can connect the 0x models to the ports of the 4x model to provide IP connectivity - which I have tested and this works fine. 

My question is, can we connect the 4x switch to an 0x switch via top of rack switches?

Rack A - 4x Console Port 1 > Top of Rack switch Gi/0/48 (VLAN 99)

Rack B - 0x Console Bonding Port > Top of Rack Switch Gi/0/48 (VLAN 99)

The below image is from the manual, the cable connecting the two console switches, can that pass through a top of rack switch if both ports are configured on the same VLAN.

[Sham82]

Hello @ Motlive,

Thank you for your post.

Please refer to page (25 onwards) - HPE IP and Server Console Switches G2 User Guide
https://support.hpe.com/hpesc/public/docDisplay?docId=c01931438&docLocale=en_US

Regards
HPE

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".