Online ROM Flash Firmware Package - HPE ILO5

[Sunitha_Mod]

This component provides updated iLO firmware that can be installed directly on supported Operating Systems. This component can also be used to obtain the firmware image for updating via iLO user interface, utilities, or through the scripting interface. Additionally, this component can be used with the Smart Update Manager.

Here are the enhancements and fixes:

Enhancements: 

Support for the SHA2 algorithm with the public key authentication method of logging into HPE iLO SSH and is applicable to all security modes.

Fixes:

* HPE Gen10 Server health LED blinks displayed different behavior between HPE iLO v3.01 and HPE iLO v3.02 upon a disk failure.
* Redfish event not sent properly when event subscriptions used mTLS.
* DHE-RSA ciphers are enabled with Disable Weak Ciphers and in High Security mode setting, making HPE iLO vulnerable.
* HPE iLO 5 v3.10 returned snmpwalk timeout when monitored by Zabbix monitoring software.
* Get_email_details failed if the user's domain name had a \ character.
* Certificate import failed on some servers, with the SSL certificate could not be imported since the input certificate is not intended for this server error.
* HPE iLO6 System Information Storage tab displayed drives without any order.
* Drive discovery, where an incorrect reporting of a removal or inserted drive IML message was getting triggered.
* HPE Apollo server power supply redundancy state.
* Where the m750 server blades go to a critical state and do not connect to HPE iLO.

Please refer to the document below for more detailed information: 

Online ROM Flash Firmware Package - HPE Integrated Lights-Out 5