Server Management - Remote Server Management
1748139 Members
4224 Online
108758 Solutions
New Discussion юеВ

Rilo II Grey screen Blinking cursor

 
Joel Savage
New Member

Rilo II Grey screen Blinking cursor

I have a DL380 G2 that Windows 2003 is installed on. I get a grey screen with blinking cursor. I can power cycle (reset) the server and it boots up OK in text and graphic mode but again, after a few days it just quits working. I'm running firmware 2.53

I know there was another thread about a DL580 with this issue but there does not seem to be a resolution for a DL380 g2 with a RILO II board.
3 REPLIES 3
M.S.Srivatsa
Valued Contributor

Re: Rilo II Grey screen Blinking cursor

Looks line you are using RILOE card.The firmware version 2.53 is applicable to RILOE card.So it is not RILOE-II card.
johnjsforumid
New Member

Re: Rilo II Grey screen Blinking cursor

Also having similar issue. However, mine automatically goes to grey and you can't see the boot sequence. It worked fine before the unit was moved to another site. Did you figure it out?
johnjsforumid
New Member

Re: Rilo II Grey screen Blinking cursor

I upgraded the firmware using the .brk file and everything works now.