HPE Community
Server Management - Remote Server Management
1751967 Members
4600 Online
108783 Solutions
New Discussion

SNMP Trap when a RAID or POWER SUPPLY FAILS

 
ILO with SNMP
New Member

‎12-21-2005 10:32 PM

‎12-21-2005 10:32 PM

SNMP Trap when a RAID or POWER SUPPLY FAILS

Hello
What kind of SNMP TRAP send a the ILO Board. It would like to be informed, when raid or an power supply fails.
Is this possible over ILO?
Cheers Günther
0 Kudos
Reply
2 REPLIES 2
David Claypool
Honored Contributor

‎12-22-2005 02:49 AM

‎12-22-2005 02:49 AM

Re: SNMP Trap when a RAID or POWER SUPPLY FAILS

The Insight agents (part of the ProLiant Support Pack) are responsible for monitoring and alerting. iLO has the ability to forward these alerts in case of a interrupted path between the host and HP SIM.
0 Kudos
Reply
acartes
Honored Contributor

‎04-03-2006 10:22 AM

‎04-03-2006 10:22 AM

Re: SNMP Trap when a RAID or POWER SUPPLY FAILS

You can send environment SNMP traps through iLO.

1) load the management agents (on the SmartStart management CD)
2) configure iLO to enable SNMP traps and pass through
3) test the iLO trap functionality is received.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.