HPE Community
Server Management - Systems Insight Manager
1825782 Members
2141 Online
109687 Solutions
New Discussion

Re: Automatic Server Recovery

 
Paul DeConti_1
Occasional Advisor

‎07-19-2005 11:23 PM

‎07-19-2005 11:23 PM

Automatic Server Recovery

I have a server that keeps on rebooting itself due to the ASR setting. When i attempt to change the ASR setting to "CONTINUE" from "REBOOT" the screen flashes and the setting stays on "REBOOT." I have full admin rights to the server. Any ideas?
0 Kudos
Reply
2 REPLIES 2
Rob Buxton
Honored Contributor

‎07-20-2005 10:26 AM

‎07-20-2005 10:26 AM

Re: Automatic Server Recovery

Check you have a suitable Read/Write community name in SNMP.
0 Kudos
Reply
Paul DeConti_1
Occasional Advisor

‎07-20-2005 10:06 PM

‎07-20-2005 10:06 PM

Re: Automatic Server Recovery

I do have the proper rights in SNMP. I found out the quick and easy way to fix this. I rebooted and changed the setting in the BIOS. I called HP and they verified that in some servers the ASR needs to be changed in the BIOS rather than thru Insight Manager. Most of the newer server are like this. The server I was experiencing this on is a ML530 G2. Even though you may have the correct rights in SIM the BIOS takes precedence over SIM.

Thanks
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.