HPE Community
Server Management - Systems Insight Manager
1849303 Members
6617 Online
104042 Solutions
New Discussion

CCI Blade PC's not showing in Enclosure

 
RobM_3
New Member

‎08-01-2006 03:08 PM

‎08-01-2006 03:08 PM

CCI Blade PC's not showing in Enclosure

We have SIM 5 running, all SNMP traps are set correctly. The Blade PC's and the enclosures all report into SIM ok.

The issue is that If we look at the enclosure in SIM, there slots for the Blades is empty. TWe can see the switch, but no blades.

How do we get the Blade PC's to associate with the enclosure?
0 Kudos
Reply
1 REPLY 1
DaGuru
Trusted Contributor

‎06-08-2008 04:59 PM

‎06-08-2008 04:59 PM

Re: CCI Blade PC's not showing in Enclosure

Hi Rob,

Do the Blades show up as managed?

If not, then it may be that they are being discovered with an ICMP Ping packet. SIM uses WMI to gather the information from the blades needed to associate them with the IA. In turn, SIM uses SNMP to gather info from the IA and switch to complete the association.

Also, we have a dedicated business forum for CCI and Remote Computing Solutions based questions. http://forums11.itrc.hp.com/service/forums/bizsupport/categoryhome.do?categoryId=735
---------------------------------------------
I work for HP, but my posts and replies are my own.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.