Cluster Identification?

[Troy Bailey]

In the old CIM7 there used to be a job that ran to id clusters. I don't see that in the new HP SIM. Does this still exist? I have several clusters that aren't identified.

Thx in advance!
Troy

[Ivan KOVAC]

hello

Check if the Cluster Management Agents are installed on every cluster nodes

Clusters or cluster nodes might not be found for the following reasons:
- Be sure the IP ranges in Automatic Discovery are set to include the Cluster and Cluster Nodes (and not exclude them).
- If there has been a name change of the Cluster or its node, be sure the DNS servers being used by the Cluster and HP Systems Insight Manager both have the new name.
- The Cluster Node might be down.
- The Cluster Node has Insight agents older than version 4.22.
- The Insight agents are not running on the Cluster Node.
- The SNMP agents are not running on the Cluster Node.
- The network traffic is swamping the network for a significant time period.
- SNMP community string might not be matching with that of the HP Systems Insight Manager settings.

Ivan