Configure SNMP through HP SIM 5.0

[Neil Murphy_2]

I'll like to add the IP address of a monitoring server to the Trap Destinations & Accepted Hosts of all servers within the data centre.
In the Configure or Repair Settings page there is no option to do this.
The Replicate Agent Settings option will allow me to do this but will overwrite other SNMP information on the servers.
Do you know of a way that I can add an IP address to the Trap Destination & Accepted Hosts on each server?

Many Thanks,
Neil

[David Claypool]

See the attached screenshot. Replicate Agent Settings does provide the granularity to set only the items you want to change.

[Michael E. Matthews]

The granularity is there but the settings are overwritten and not augmented. In addition, and possibly off-thread, there is the 127.0.0.1, 0 entries in the accept packets from box. Has there been a fix created for this as of yet?

Thank you all as always. Apologies if I missed it as it went by.