Duplicate HP SIM System Report Entires

[david mcdonald_5]

When you run a report to cover all systems listed in HPSIM there is 6 duplicate entires for each server on the list. Does anyone have any ideas why this is happening

Thanks.

[Mikael Rönnbäck]

Could use a little more details, but are you using for example both SNMP and WMI/WBEM, I've seen that in case both are enabled I get duplicate entries in the disk statistics.

[david mcdonald_5]

Hi there,

im using both WBEM and SNMP, this problem happens when you restart the server and it sometimes sorts itself out after about a week of running, reboot again and all the multiple entries appear again.

Thanks..

[wordem]

I'm not sure but I also have the same problem. I usually only have 2 entries for devices. I did check the SNMP & WBEM theory listed above but it not make a difference. Any other suggestions?