Server Management - Systems Insight Manager
1834008 Members
1627 Online
110063 Solutions
New Discussion

Re: Error shooting many servers at once using SIM 4.2

 
Mike Strako
Trusted Contributor

Error shooting many servers at once using SIM 4.2

I have a case opened up with HP, ( hope it is escalated) which involves SIM. I have attached a text file showing my problem. It appears we cannot shoot multiple servers at a clip, when I run 5 or 10 in a batch, only the first one gets updated then I get this message:


HP Remote Deployment Console Utility

-------------------------------------------------------------------------------

Initializing...


Unable to connect to the target computer. All available connection methods were
attempted with no success.

A possible reason is that the operating system of the target computer is not sup
ported. Either the username is unknown, or a bad password was provided.

Unknown Initialization Error!

I use both initial support paq install and the normal install software/firmware option. We need to shoot 200 servers by this weekend before our cyber center cut-over. Can you help out this poor soul??? Many thanks

Mike.
1 REPLY 1
Harry Galanos
Frequent Advisor

Re: Error shooting many servers at once using SIM 4.2

Hi Mike,

Do you have SNMP and WBEM setup correctly? Also does the WBEM account have local admin on each server?