HP c7000 enclosures in SIM

[fishmn]

We currently have 7 c7000 enclosures on our network that we've setup to communicate with SIM via SNMP and trusted by certificate with the SIM server.

They tend to show up only partially in SIM and many times the OA modules do not show up associated with an enclosure at all. We are up to the latest firware levels for all devices. We are using SIM 5.1sp1.

Anybody else having similar weirdness or have a solution to getting them to show up properly in SIM and be able to launch the OA and Virtual Connect managers?

Thanks

[Rider]

Hi Rona,

Which version of Blade system Intergrated you installed. If it is VERSION 2.4, Install BSIM 3.0 and check. From below link you can download

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=0&prodSeriesId=343112&prodNameId=3288148&swLang=8&taskId=135&swItem=MTX-62a64701ddfc47a9ad49ba7e7b&mode=3

[fishmn]

I've forgot about that add-in to SIM. Funny part is I've had certain enclosures fully populate in SIM and other not.. I'll have to find an opportunity to install the Manager. It looks like it is up to ver 3.1 now. Thanks