HP Sim 3.0 - VCRM - The repository is empty

[TobiasPercival]

Hello,
This is my first post, so please bare with me.

Following the upgrade to HP Sim 3.0, I configured the VCRM and the VCA on the Sim server. System Management Homepage reports the VCRM and the VCA are configured correctly (both displaying green ticks).

However, when I look at the version control repository with SIM, I receive a 'This repository is empty' message. Looking in the SMH, I have one custom baseline and 9 PSP's (a mixture of Windows and Linux).

This only happened following the upgrade. Has anyone else experienced a similar issue, or can provide some assistance.

Many thanks,
Tobias

[TechGuru]

what is the version VCRM used?

click on "last updated" link present just above VCRM servers list in "HPSIM->version control repository"

Make sure repository is not busy rescanning, by checking VCRM's logs under SMH->VCRM->log

[TobiasPercival]

Thank you for your reply. Yes, the scanning of the repository had finished.

In the end, after I had uninstalled and reinstalled the VCRM (with no success), I reinstalled HP SIM. This thankfully fixed the problem.

Toby