hp SIM 7.4 VCRM

[losgaaner]

[<FORCE-OVERWRITE>]
yes
[<ADMIN-GROUP>]
HPVCM
[<OPERATOR-GROUP>]
HPVCM
[<USER-GROUP>]

[<ANONYMOUS-ACCESS>]
yes
[<LOCAL-ACCESS-ENABLED>]
yes
[<LOCAL-ACCESS-TYPE>]
Administrator
[<PORT-2301-ENABLED>]
yes
[<TRUSTMODE>]
TrustByAll
[<CERTNAME_1>]

[<CERTVALUE_1>]

[<CERTNAME_2>]

[<CERTVALUE_2>]

[<CERTNAME_3>]

[<CERTVALUE_3>]

[<CERTNAME_4>]
v31000349
[<CERTVALUE_4>]

[<CERTNAME_5>]
v31000349
[<CERTVALUE_5>]

[<XENAMELIST>]
v31000349
[<IP-BINDING>]
no
[<IP-BINDING-LIST>]

[<IP-RESTRICTED-LOGINS>]
no
[<IP-RESTRICTED-INCLUDE>]

[<IP-RESTRICTED-EXCLUDE>]

[<ALLOW-DEFAULT-OS-ADMIN>]
no

[Andrew_Haak]

I see two errors one the set WBEM subscription, is WBEM your dataprovider. If you use SNMP you can skip this error. The second is the skip on the VCA config. How does the VCA of a source VCA config look like ?

[losgaaner]

thank you for your reply,

where do i find the vca config?

[Andrew_Haak]

Hello again,

if you open a System Management Homepageand go to the Version Control Agent you will see the settings option in the top section. Here you can configure your VCRM server, please use FQDN names, for the credentials you need an account that has local admin rights on your SIM and/or VCRM server. In most cases people combine the SMIN and VCRM function kn one server. Once one VCA is configured it can be used as a source settings template to replicate to one or more other servers that use the same Baseline.