HPE Community
Server Management - Systems Insight Manager
1833476 Members
2878 Online
110052 Solutions
New Discussion

Re: HP SIM With Windows 2003 SP1

 
LOUIS_37
Occasional Advisor

‎10-05-2005 02:45 AM

‎10-05-2005 02:45 AM

HP SIM With Windows 2003 SP1

I have installed a new server with WINDOWS 2003 SP1. When I discovered it on HP SIM, it stay on a status unknown.
If someone have an idea about this problem

Thanks in advance

Eric
0 Kudos
3 REPLIES 3
David Claypool
Honored Contributor

‎10-05-2005 03:19 AM

‎10-05-2005 03:19 AM

Re: HP SIM With Windows 2003 SP1

Check your SNMP service. By default, WS03 installs SNMP without a community string and sets it to only respond to 'localhost.' You can correct this automatically in HP SIM 4.2 or later by using 'Configure or Repair Agents.'
0 Kudos
LOUIS_37
Occasional Advisor

‎10-05-2005 06:07 PM

‎10-05-2005 06:07 PM

Re: HP SIM With Windows 2003 SP1

Thanks, my problem is solved now

Eric
0 Kudos
LOUIS_37
Occasional Advisor

‎10-05-2005 06:09 PM

‎10-05-2005 06:09 PM

Re: HP SIM With Windows 2003 SP1

Many thanks to David Claypool for his help !

Check your SNMP service. By default, WS03 installs SNMP without a community string and sets it to only respond to 'localhost.' You can correct this automatically in HP SIM 4.2 or later by using 'Configure or Repair Agents.'
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.