HP SIM With Windows 2003 SP1

[LOUIS_37]

I have installed a new server with WINDOWS 2003 SP1. When I discovered it on HP SIM, it stay on a status unknown.
If someone have an idea about this problem

Thanks in advance

Eric

[David Claypool]

Check your SNMP service. By default, WS03 installs SNMP without a community string and sets it to only respond to 'localhost.' You can correct this automatically in HP SIM 4.2 or later by using 'Configure or Repair Agents.'

[LOUIS_37]

Thanks, my problem is solved now

Eric

[LOUIS_37]

Many thanks to David Claypool for his help !

Check your SNMP service. By default, WS03 installs SNMP without a community string and sets it to only respond to 'localhost.' You can correct this automatically in HP SIM 4.2 or later by using 'Configure or Repair Agents.'