HP Systems Insight Manager 5.0

[Darrell Shen]

I have installed HP Systems Insight Manager 5.0 in rx4640 with HP-UX 11i v2 successfully. When I access the System Management Homepage (tcp 2381), there is only "System Status Summary" but no other health monitoring reports like "Processor Utilization". Could anybody help me how to make these monitoring / configuring tools available with web and snmp? The snmp is working for public MIB but it seems no update on private? Thanks for help.

[Sung Oh]

Hi Darrell,

you can customize default web page.

http://docs.hp.com/en/5991-4498/5991-4498.pdf

Regards,
Sung

[Darrell Shen]

Using Getif, I could not get a value of .1.3.6.1.4.1.232.11.2.3.1.1.3.0 (The CPU utilization as a percentage of the heoretical
maximum during the last five minutes) or .1.3.6.1.4.1.232.6.2.6.8.1.4.1.1 (The current temperature sensor reading in degrees celsius). However, I am able to get other information like .1.3.6.1.2.1.1.1 (sysDescr). I wonder if there is any configuration on snmp or HP agents needed to be setup. Anybody can help? Thanks.

[David Claypool]

Integrity-specific information is not instrumented in SNMP but instead uses WBEM. More info: http://h71028.www7.hp.com/enterprise/cache/11380-0-0-225-121.aspx?jumpid=reg_R1002_USEN