HPE Community
Server Management - Systems Insight Manager
1833451 Members
3082 Online
110052 Solutions
New Discussion

ILO-card not connected, SIM reports it red!

 
Mikael_17
Advisor

‎06-11-2006 05:48 PM

‎06-11-2006 05:48 PM

ILO-card not connected, SIM reports it red!

Hi

I have a customer that connect and use the ILO-card on most of the server but not all.

With firmware newer than 1.64 HP SIM report the server as red if the ILO-card is not connected.
With firmware 1.64 SIM report the server as green if the ILO-card is not connected.

Is it possible to have newer ILO-firmware that 1.64 and a disconnected ILO-card and get HP SIM to report it as green????

Regards Mikael
0 Kudos
Reply
1 REPLY 1
Terence Burton
Occasional Advisor

‎06-13-2006 02:12 AM

‎06-13-2006 02:12 AM

Re: ILO-card not connected, SIM reports it red!

Hi Mikael,
I had similar issues after I performed a firmware update on my servers. I got around the problem by openning the HP management Agents program (From within the Control Panel). From the services tab, move "Remote Insight Information" to the inactive agents window. Ok the change and the agents will restart.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.