iLO on a DL380 + VMWare

[Holger Kunc]

Hi!

I have a DL380 G3 running ESX 2.5.2 server. The server has the Management Agents 7.40 running, ilo has latest firmware. I´m running SIM 5.0 SP4. In SIM, the server is on "green", but the ILO states "orange" in HW Status. I cannot see, why it´s orange. Hardware of ILO is fine, up, running and working. The VMWARE server itself has only a nic not connected, but the server status itself is green. Any thoughts about that?

Holger

[tripet]

Hi !

Try to clear all logs in the ilo web interface.

Clear the ilo event log , and the integrated management logs.

Wait a minute and refresh the insighit sim interface.

[Rob Buxton]

Do you have a Network connection to the ILO?
If not, see the following thread on how to disable the reporting.

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1004507