Server Management - Systems Insight Manager
1831675 Members
2144 Online
110029 Solutions
New Discussion

Insight Manager 7! Help

 
Sultan Shaikh
New Member

Insight Manager 7! Help

Hi,

I need to known if I can use the Insight Manager 7 or later to remote boot the server and able to see console at the reboot time?

Sorry, I am new to this software and any help will be helpful.

Thank You

Sultan
1 REPLY 1
Ed Cox
Respected Contributor

Re: Insight Manager 7! Help

Sultan,
Good news - bad news:

You are able to reboot a server provided you have a done a couple of things up front.
1. Control Panel - HP Management Agents applet. Click on SNMP Settings Tab and you will see two check boxes. One for Enable SNMP Sets and the other for Enable Remote Reboot. Make sure both are checked.
2. Go to Services and verify you have a Read Write Community string vs. a Read Only string. It's ok to have both, just make sure that at least one string is a Read\Write string.

Then through IM 7 you can link to the server's System Management Homepage. Once you get there you will see "Tasks" link at the top. Look under there for a Recovery area and you will see a link to "Reboot Server".
The bad news is...that if you don't have an iLO or Riloe...you can't watch the server reboot.
Good luck,
Ed