Insight Manager and Integrated Management Log

[Steven Stuart]

Problem at first was a couple of servers would not allow us remotely, or from the server itself to "Mark Repaired" to errors under Integrated Management Log. It would say make sure the Community string (case sensitive)was the same between the device and the server and the enable sets were enabled. Both of these were set properly, but it would still not allow the "mark Repaired". A co-worker went in and started to update items and restart the SNMP service. Now the "Integrated Log" does not show up and in its place has "Critical Errors" and "Power On Msg" as blank, and "Corr. Memory" as openable, but empty. On the Server now if you try to open the Integrated Management Log it starts to and then says "out of memory"

Thanks,
Steven Stuart