Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Installing OpenSSH from SIM 7.0 to WS2008 managed systems

 
Highlighted
Occasional Advisor

Installing OpenSSH from SIM 7.0 to WS2008 managed systems

Hi Guys

 

As the title states, I need help with installing OpenSSH via SIM version 7.0 on windows systems with windows server 2008 OS.

I have the OpenSSH server service installed on the CMS & when I try to install it via SIM on WS2003 it worked great.

Once I try it on WS2008, it fails to install. I am define proper credentials (administrator) to login to the managed systems but I get this...(see attached) which is totally unclear on where is the problem???

 

Please assist.

11 REPLIES 11
Highlighted
Valued Contributor

Re: Installing OpenSSH from SIM 7.0 to WS2008 managed systems

can you post the content of the detailed hp sum log file (as mentioned below in your txt) ?

C:\cpqsystem\hp\log\192.168.200.122

 

about return code -3 i found in hpsum manual following explanation:

 

FAILURE_COMPONENT_FAILED

 -3

 253

 The installation of the component failed.

source: http://h50146.www5.hp.com/products/software/oe/linux/mainstream/bin/support/doc/general/mgmt/psp/v900/psp900_rhel5_x86/CLIHelp.txt

 

Highlighted
Occasional Advisor

Re: Installing OpenSSH from SIM 7.0 to WS2008 managed systems

Hi

 

Thanks for the info.

Attached are the log file you requested...maybe you can figure out what I'm doing wrong :)

Highlighted
Valued Contributor

Re: Installing OpenSSH from SIM 7.0 to WS2008 managed systems

Well not really more details in the log file...

what happens if you try to execute the cp011220.exe manually on a target system?

maybe you have to run it with "run as admin"...

Highlighted
Occasional Advisor

Re: Installing OpenSSH from SIM 7.0 to WS2008 managed systems

Hi

 

I tried to execute it on the actual system with the same login user & password that I used to execute it via SIM and it works great. This user is defined as administrator...

Don't know why but, the problem is only when I run it though SIM and only on WS2008.

Highlighted
Valued Contributor

Re: Installing OpenSSH from SIM 7.0 to WS2008 managed systems

check the file C:\windows\system32\logfiles\firewall\pfirewall.log if any drops are reported from your HP SIMs IP Adress.

If so, your Firewall on the W2008 machine is blocking the needed port from HP SIM so that it cannot install it.

Highlighted
Occasional Advisor

Re: Installing OpenSSH from SIM 7.0 to WS2008 managed systems

both the CMS & the managed system FW are disabled.

Highlighted
Valued Contributor

Re: Installing OpenSSH from SIM 7.0 to WS2008 managed systems

hm then you should open a case at HP...

I don't have any other ideas I'm sorry!

Highlighted
Occasional Advisor

Re: Installing OpenSSH from SIM 7.0 to WS2008 managed systems

Thanks for trying.

I'll open a support request.

Highlighted
Honored Contributor

Re: Installing OpenSSH from SIM 7.0 to WS2008 managed systems

Is UAC enabled on the CMS?

If my post was helpful please award me Kudos! or Points :)